Synopsys, Inc. (Nasdaq:SNPS), a world leader in software and IP for semiconductor design and manufacturing, today announced a major expansion to its leading DesignWare® USB IP (www.synopsys.com/usb) product line with support for the USB 2.0 Link Power Management (LPM) and High Speed Inter-Chip (HSIC) standards. The new DesignWare USB LPM and HSIC digital controller and PHY IP reduce power consumption and area for USB-enabled chips. Both IP products leverage Synopsys' rich experience in low power design methodology and tools to enable more power efficient integrated circuits (ICs).
DesignWare USB Link Power Management IP
The DesignWare USB LPM IP digital controller and PHY IP implement a new power sleep state to reduce power consumption. The USB LPM IP can provide faster suspend and resume times by three orders of magnitude (now microseconds instead of milliseconds) compared to the existing USB 2.0 specification, allowing devices to save power by more frequently turning off the USB connection while idle. The DesignWare USB LPM IP is designed to further reduce power consumption over the existing low power DesignWare USB 2.0 IP architecture. The current DesignWare Hi-Speed USB On-the-Go digital controller IP implements multiple power domains, allowing nearly the entire core to be completely turned off while idle. This maximizes battery life with reduced leakage power by 95 percent compared to solutions that do not employ multiple power domains.
DesignWare USB High Speed Inter-Chip IP
The DesignWare HSIC digital controller and PHY IP eliminates USB cables and connectors, and simplifies the connection down to two wires for high speed chip-to-chip communication operating up to 480 Mbps. Unlike other USB HSIC PHY offerings, the DesignWare USB HSIC IP is the industry's only IP solution consisting of integrated high speed digital and analog blocks, PLL, and I/O pads which are delivered as GDSII for advanced foundry processes. This can save designers significant time, cost and the risk of acquiring and integrating the IP separately. By eliminating the need for 3.3V signaling and 5V short protection logic, the DesignWare USB HSIC PHY offers up to 50 percent lower power and 75 percent smaller area compared to traditional USB 2.0 PHYs.
The DesignWare USB HSIC IP remains fully compatible with existing USB software stacks, allowing designers to lower system costs, shorten design time and improve productivity by reusing existing USB interfaces, drivers and firmware. The DesignWare USB HSIC digital controller, which is compliant with HSIC signaling, supports high speed USB 2.0 data transfers up to 480 Mbps. The USB HSIC IP solution is ideal for applications such as 3G/4G handsets, smartphones, set-top boxes and mobile internet devices.
"As one of the leading companies in USB IP solutions, Synopsys continues to be in the forefront of supporting the latest USB specifications," said Jeff Ravencraft, USB-IF President. "This solution enables manufacturers to integrate USB IP into mobile applications for higher bandwidth chip-to-chip connectivity with enhanced battery life and ultimately pass the cost savings to their customers."
"As the leader in USB IP for six years in a row (Dataquest 2007), we are very excited about how these standards will significantly lower power for mobile devices and drive the USB protocol into new applications requiring chip-to-chip communication," said John Koeter, senior director of marketing for IP and Services at Synopsys. "By supporting both the HSIC and LPM standards, we enable designers to rely on one vendor for their USB IP needs with the quality they have come to expect from Synopsys."
Availability
The first DesignWare USB IP for the new USB 2.0 LPM and HSIC standards is scheduled to be available in Q2'08. The new products will complement the existing DesignWare USB 2.0 family of digital controllers, PHY and Verification IP. For more information on DesignWare USB IP visit www.synopsys.com/usb or the blog: www.synopsysoc.org/usb-blog/
About DesignWare IP
Synopsys offers a broad portfolio of high-quality, silicon-proven digital, mixed-signal and verification IP for system-on-chip designs As the leading provider of connectivity IP, Synopsys delivers the industry's most comprehensive solution for widely used protocols such as USB, PCI Express, SATA, Ethernet and DDR. In addition to connectivity IP, Synopsys offers SystemC transaction level models to build virtual platforms for rapid, pre-silicon development of software. When combined with a robust IP development methodology, extensive investment in quality and comprehensive technical support, DesignWare IP enables designers to accelerate time-to-market and reduce integration risk. For more information on DesignWare IP, visit http://www.synopsys.com/...
DesignWare USB Link Power Management IP
The DesignWare USB LPM IP digital controller and PHY IP implement a new power sleep state to reduce power consumption. The USB LPM IP can provide faster suspend and resume times by three orders of magnitude (now microseconds instead of milliseconds) compared to the existing USB 2.0 specification, allowing devices to save power by more frequently turning off the USB connection while idle. The DesignWare USB LPM IP is designed to further reduce power consumption over the existing low power DesignWare USB 2.0 IP architecture. The current DesignWare Hi-Speed USB On-the-Go digital controller IP implements multiple power domains, allowing nearly the entire core to be completely turned off while idle. This maximizes battery life with reduced leakage power by 95 percent compared to solutions that do not employ multiple power domains.
DesignWare USB High Speed Inter-Chip IP
The DesignWare HSIC digital controller and PHY IP eliminates USB cables and connectors, and simplifies the connection down to two wires for high speed chip-to-chip communication operating up to 480 Mbps. Unlike other USB HSIC PHY offerings, the DesignWare USB HSIC IP is the industry's only IP solution consisting of integrated high speed digital and analog blocks, PLL, and I/O pads which are delivered as GDSII for advanced foundry processes. This can save designers significant time, cost and the risk of acquiring and integrating the IP separately. By eliminating the need for 3.3V signaling and 5V short protection logic, the DesignWare USB HSIC PHY offers up to 50 percent lower power and 75 percent smaller area compared to traditional USB 2.0 PHYs.
The DesignWare USB HSIC IP remains fully compatible with existing USB software stacks, allowing designers to lower system costs, shorten design time and improve productivity by reusing existing USB interfaces, drivers and firmware. The DesignWare USB HSIC digital controller, which is compliant with HSIC signaling, supports high speed USB 2.0 data transfers up to 480 Mbps. The USB HSIC IP solution is ideal for applications such as 3G/4G handsets, smartphones, set-top boxes and mobile internet devices.
"As one of the leading companies in USB IP solutions, Synopsys continues to be in the forefront of supporting the latest USB specifications," said Jeff Ravencraft, USB-IF President. "This solution enables manufacturers to integrate USB IP into mobile applications for higher bandwidth chip-to-chip connectivity with enhanced battery life and ultimately pass the cost savings to their customers."
"As the leader in USB IP for six years in a row (Dataquest 2007), we are very excited about how these standards will significantly lower power for mobile devices and drive the USB protocol into new applications requiring chip-to-chip communication," said John Koeter, senior director of marketing for IP and Services at Synopsys. "By supporting both the HSIC and LPM standards, we enable designers to rely on one vendor for their USB IP needs with the quality they have come to expect from Synopsys."
Availability
The first DesignWare USB IP for the new USB 2.0 LPM and HSIC standards is scheduled to be available in Q2'08. The new products will complement the existing DesignWare USB 2.0 family of digital controllers, PHY and Verification IP. For more information on DesignWare USB IP visit www.synopsys.com/usb or the blog: www.synopsysoc.org/usb-blog/
About DesignWare IP
Synopsys offers a broad portfolio of high-quality, silicon-proven digital, mixed-signal and verification IP for system-on-chip designs As the leading provider of connectivity IP, Synopsys delivers the industry's most comprehensive solution for widely used protocols such as USB, PCI Express, SATA, Ethernet and DDR. In addition to connectivity IP, Synopsys offers SystemC transaction level models to build virtual platforms for rapid, pre-silicon development of software. When combined with a robust IP development methodology, extensive investment in quality and comprehensive technical support, DesignWare IP enables designers to accelerate time-to-market and reduce integration risk. For more information on DesignWare IP, visit http://www.synopsys.com/...
