Created for extremes: Modular Embedded PC with XEON Power and 10x PoE

MX1-10FEP - Modular Embedded PC with XEON computing power

(PresseBox) ( Reutlingen, )
With the MX1-10FEP, ICP Deutschland launches the first embedded PC of the new modular M series. The MX1 is designed to withstand extremes and has high computing power, flexible expansion options for hardware and applications in extreme environments. With the 1151 processor socket and the Intel® C246 chipset used, the MX1 supports XEON and Core I processors from Intel 8th generation. This generation brings a performance increase of up to 36% for XEON and up to 15% for Core I processors compared to the previous generation. Both 35 Watt CPU variants and CPUs with up to 80 Watt are supported. Up to 32GB ECC or non-ECC DDR4 2666 MHz RAM can be installed depending on the processor variant. The Intel HD graphics provides an HDMI, a display port and a DVI-I output. In the case with a volume of just 7.8 litres, three 2.5" installation frames, one of which is designed as a removable medium, two Mini PCIe slots with mSATA support, an M.2 2242/2260/2280 slot with PCIe x4 signal, an M.2 2230 and a PCI Express x16 interface can be accommodated. The latter interface is designed for the operation of expansion and graphics cards. The MX1 also offers connection options for remote power ON/OFF and remote reset. This allows the MX1 to be placed and operated even in places that are difficult to access. There is also space for one Intel i219-LM and one i210-IT GbE LAN port each, six USB 3.0, two USB 2.0, PS/2, two RS-232/422/485, two SIM card holders and three expansion slots for optional MX1 expansion modules. As an expansion module, fourfold LAN with RJ45 with and without PoE+ functionality, fourfold LAN with M12 connector with and without PoE+ functionality, a twofold RJ45 PoE+ module, an isolated fourfold combo RS-232/422/485 and 8-bit DIO interface and a Vehicle Power Ignition module are available. For example, the MX1 can be equipped with ten PoE connections for image processors. The MX1 can withstand ambient temperatures from -40 °C to 70 °C, depending on the CPU type, and can offer additional EN50155 and E-MARK certifications for vehicle and rail operation. With a voltage range from 9 to 48 volts DC, the MX1 covers a very wide range, industrially designed with reverse power control, overvoltage and overcurrent protection. ICP supplies the MX1 as a ready-to-use system with matching industrial RAMs and storage media to ensure that the extremes can also be exploited.

  • Fanless Embedded Box PC with LGA1151 socket
  • 8th Generation Intel® CoreTM I and XEON Processors
  • Intel® C246 chipset
  • 3x 2,5" drive bays
  • 1x M.2 2242/2260/2280 M Key, 1x M.2 M2230 E Key
  • 2x mini PCI Express Full Size
  • USB3.0, HDMI, DP, DVI-I, Dual GbE, RS-232/422/485
  • image processing
  • Transport/Traffic
Product link

Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an