Fuel hoses according to DIN 73379-A1, 73379-B and 73379-C-ECO
We offer an extensive range of hoses in the area of installation. The fuel hoses offered, consisting of a rubber top layer with a reinforcement inlay, are suitable for conveying petrol (E5, E10, E15, E85), diesel and biodiesel (B10, B20). They are resistant to oil, acid, heat, ozone and weather influences. In addition, the new fuel hoses comply with standard 73379-A1, which requires a burst pressure of 50 bar.
In addition, we offer fuel hoses that comply with DIN 73379-B. These hoses have a cured-on twine braid. They are suitable for the supply of petrol (E5, E10, E15, E85), diesel and biodiesel (B10 and B20).
In addition to the fuel hoses mentioned above, we also offer fuel hoses in accordance with DIN 73379-C-ECO. These depressurised fuel hoses are made of ECO rubber (epichlorohydrin rubber). They can be used for petrol (E5, E10), diesel and biodiesel (B10, B20, B100). The hoses have low permeability (describes whether and to what extent liquids pass through a material), are highly flexible and resistant to high temperatures. The advantage is that they can also be used as vacuum hoses.
PVC hoses
In its range of hoses, we also offer a total of five different transparent PVC hoses. These are suitable for the windscreen washer system, ventilation and the vent overflow and have an internal diameter of 4, 5, 6, 8 or 10 millimetres. Attention: these hoses are not suitable for conveying fuel!
AdBlue (SCR) hoses
AdBlue (SCR) hoses are also included in our range. These hoses also have good resistance to ozone, heat and weather influences. We offer two different versions with an internal diameter of 4 or 6 millimetres here.
We offer a practical wall mounting for up to six hose reels and which is suitable for the hose range presented. This means that the right hose for the relevant work is always ready to hand.
Fuel hose
Article number: 51280*
Hose
PVC
Article number: 512807*
Hose
AdBlue (SCR)
Article number: 51280540, 51280560
Wall mounting, fuel lines
Article number: 51280660
We offer an extensive range of hoses in the area of installation. The fuel hoses offered, consisting of a rubber top layer with a reinforcement inlay, are suitable for conveying petrol (E5, E10, E15, E85), diesel and biodiesel (B10, B20). They are resistant to oil, acid, heat, ozone and weather influences. In addition, the new fuel hoses comply with standard 73379-A1, which requires a burst pressure of 50 bar.
In addition, we offer fuel hoses that comply with DIN 73379-B. These hoses have a cured-on twine braid. They are suitable for the supply of petrol (E5, E10, E15, E85), diesel and biodiesel (B10 and B20).
In addition to the fuel hoses mentioned above, we also offer fuel hoses in accordance with DIN 73379-C-ECO. These depressurised fuel hoses are made of ECO rubber (epichlorohydrin rubber). They can be used for petrol (E5, E10), diesel and biodiesel (B10, B20, B100). The hoses have low permeability (describes whether and to what extent liquids pass through a material), are highly flexible and resistant to high temperatures. The advantage is that they can also be used as vacuum hoses.
PVC hoses
In its range of hoses, we also offer a total of five different transparent PVC hoses. These are suitable for the windscreen washer system, ventilation and the vent overflow and have an internal diameter of 4, 5, 6, 8 or 10 millimetres. Attention: these hoses are not suitable for conveying fuel!
AdBlue (SCR) hoses
AdBlue (SCR) hoses are also included in our range. These hoses also have good resistance to ozone, heat and weather influences. We offer two different versions with an internal diameter of 4 or 6 millimetres here.
We offer a practical wall mounting for up to six hose reels and which is suitable for the hose range presented. This means that the right hose for the relevant work is always ready to hand.
Fuel hose
Article number: 51280*
Hose
PVC
Article number: 512807*
Hose
AdBlue (SCR)
Article number: 51280540, 51280560
Wall mounting, fuel lines
Article number: 51280660
