Requirements on gaskets in manufacturing of lactose for the pharmaceutical industry

Lactose, as an essential part for a large number of medicines, is obtained under rigid hygienic requirements during the processing of milk

Neuss, (PresseBox) - The pharmaceutical industry demands the highest standards on dairies, which process whey to lactose for pharmaceutical purposes. It is assumed that the hygienic requirements of the actual manufacturing of medicines are also applied in the dairy. Therefore this lactose usually represents the highest quality level of milk processing in dairies. Hence the hygienic design of the whole production plant is very important in which the gaskets are of a particular significance. Also the statutory requirements on gasket forms and materials are constantly expanding. The EHEDG (European Hygienic Engineering & Design Group) requires, among other things, that small to medium-sized closed pipe components can be cleaned in the installed state (CIP). The materials must also be sterilizable with steam (SIP) and ensure bacterial impenetrability.

Critical process step: Cleaning

In order to meet the high hygienic demands, and the economic demands in terms of productivity and short downtimes, cleaning processes have to be cleaner and carried out faster. A classic strategy to achieve this is changing the parameters of the cleaning process, e.g. increasing of the temperature or the concentration of the cleaning agents. Well-known materials such as MVQ silicone, NBR, HNBR, FKM, EPDM and conventional PTFE reach their limits quickly. Usually, the temperature cannot be increased further with the existing materials or the materials have to be altered so that they may no longer be compliant with statutory requirements. In addition, most of the materials tend to intrude into the pipe under strong stress in extreme conditions. That leads to flow losses and dead spots, which is a new additional risk for contamination. Thus, these types of gaskets are the limiting factor for a further increase in productivity while maintaining the hygienic standards. In addition, higher temperatures and higher use of cleaning agents are also cost factors that affect profitability negatively.

A new material for new requirements 

The solution for the high hygienic and economic requirements on a gasket is in the durable, modified and restructured PTFE material GYLON®. In the production process, numerous layers of PTFE arranged in different directions are calendered and sintered. The result is a material which is resistant to tensile stress and greatly reduced in cold flow. Gaskets made of this modified restructured PTFE have a high compressibility and recovery, are very flexible and do not break under high stress. These gaskets meet the highest requirements in terms of safety, stability, service life, preventing of dead space, and temperature. GYLON BIO-PRO® PLUS gaskets manufactured from this material have all the relevant approvals, like 3-A Sanitary standards and TA-Luft, and contain neither carcinogenic phthalates, bisphenol nor animal ingredients.

A new way in cleaning

The surface tension of the new GYLON BIO-PRO® PLUS gasket is very low, thereby preventing the adhesion of materials to the gasket. This property has also been independently verified by a 3-A 20-27 test conducted at the Element Materials Technology testing laboratory in the USA. Comparative tests demonstrated cleanability identical and in some respects superior to that of polished type 316 stainless steel. At the same time, the intrusion into the interior of the pipe is greatly reduced. This means the new gasket behaves like the pipe itself during the cleaning of the production line, and therefore is no longer the limiting factor for the cleanability. This allows resetting the cleaning parameters, in particular temperature and concentration of the used cleaning agents, and in good conditions to reduce them. This could lead to saving of resources with the same cleaning result, which is a completely new way in reaching the desired hygienic standard. The full effect can be achieved in particular in new facilities, since with the GYLON BIO-PRO® PLUS gaskets an EHEDG design can already be taken into account in the planning phase and thus a EHEDG certification of the entire facility with reduced cleaning parameters is possible.

New PTFE gasket for the lactose production

The new, pure PTFE gasket GYLON BIO-PRO® PLUS by Garlock meets the stringent requirements imposed by the pharmaceutical industry as regards sealing properties for the lactose production. This product line, specially tailored to the milk processing industry, meets international standards and regulations, is available in all standard sizes, and is universally applicable.

Website Promotion

Garlock GmbH

Garlock, part of EnPro Industries Inc., is one of the leading companies in the field of high performance sealing technology and is considered to be a specialist for sealing critical, demanding media in innovative machine, engineering and construction and in the process industry. With an integrated spectrum of services, Garlock supports a wide variety of industries. Garlock offers the best possible individualized technical consultancy and industry specific engineering competence in designing, producing, supplying and commissioning its sealing products. The main goal is always to ensure a safe, sustainable and environmentally compatible machine and plant operation. The product portfolio covers cut gaskets made of modified PTFE and fiber materials, shaft seals, bearing isolators, diaphragms, metallic gaskets, compression packing, hydraulic seals, graphite seals and butterfly valves. As well as standard seals, Garlock primarily develops and produces special solutions for customer specific applications. These seals are used in such industries as machine and plant engineering and construction, pharma and food, conventional and alternative power generation, steel and aluminum, paper, mining, marine and oil and gas. Garlock also has its own research and development facilities, which can also be called upon for in-depth examinations and analyses within the scope of customer support. Roughly 1400 employees work for the company at 22 locations. Garlock is represented in more than 90 other countries through distribution partners and specialist dealers.

Milestones

» 1887 Olin J. Garlock founds Garlock
» 1923 CHEVRON®-Set for locomotive steam cylinders and piston introduced
» 1928 KLOZURE®, the first ever synthetic rubber shaft seal is introduced
» 1967 The GYLON® family is introduced
» 1979 BLUE-GARD® is introduced, the world´s first asbestos-free fiber flat seal
» 2007 GYLON BIO-PRO® is introduced
» 2011 Introduction of the advanced labyrinth SGi™
» 2012 Centralization of the global production of GAR-SEAL valves at the facility in Neuss, Germany
» 2016 Introduction of the GYLON BIO-PRO® PLUS for the pharmaceutical industry

Facts & Figures

» Industry: Sealing technology
» Products: Seals for static and dynamic applications and valves, such as shaft seals, labyrinth seals, compression packaging, cut gaskets, graphite seals and valves
» Market position: Leader for sealing solutions for critical and complex machine and plant construction as well as in the process industry
» Employees: 1400 worldwide

Diese Pressemitteilungen könnten Sie auch interessieren

News abonnieren

Mit dem Aboservice der PresseBox, erhalten Sie tagesaktuell und zu einer gewünschten Zeit, relevante Presseinformationen aus Themengebieten, die für Sie interessant sind. Für die Zusendung der gewünschten Pressemeldungen, geben Sie bitte Ihre E-Mail-Adresse ein.

Es ist ein Fehler aufgetreten!

Vielen Dank! Sie erhalten in Kürze eine Bestätigungsemail.


Ich möchte die kostenlose Pressemail abonnieren und habe die Bedingungen hierzu gelesen und akzeptiert.