The SENSOR+TEST trade fair in Nürnberg is the world's leading forum for sensors, measuring and testing. From simple micro-sensors to complex test rigs, from ready-to-use components to individualized services, SENSOR+TEST represents the complete competence in measurement technology.
EPSON Electronics Europe GmbH has joined this exhibition from 2011. In 2012, we focus on displaying an "Inertial measurement unit (IMU)" and "Q-MEMS Gyro sensors".
The Sensor+Test will be held from 22. - 24. May 2012.
Epson Europe Electronics GmbH will be located in Hall 12, 374.
Inertial measurement unit (IMU) -S4E5A0A0-
Detection range
Gyro +/-300dps, Accelerometer +/-3G
Small and lightweight
External dimensions: 24 x 24 x 10 mm3
Weight: 7grams
Low power consumption
30 mA at VDD = 3.3V
High-accuracy, high-stability measurement performance
Angle random walk: less than 0.2 deg/√hr (accuracy)
Gyro bias stability: less than 6 deg/hr (stability)
Initial bias error: ±0.5 deg/s (1s) (static stability)
Comes with SPI and UART digital serial interfaces
Micro USB board for S4E5A0A0
Tiny USB board for IMU evaluation
This board acts as converter UART-I/F to USB-I/F.
It enables easy evaluation of the IMU with an laptop.
CAN bus system with IMU
IMU with CAN interface
CAN 2.0a/b protocol
(Baud rate Max. 1Mbps, Number of node Max. 127)
IP67 water proof
Industrial standard 5-pin M12 interface connector
Wireless system with IMU
Wireless connection IMU
IMU with fully featured Bluetooth class2 interface
(Max. 1kHz sampling, Number of node Max.4)
2h operation with Ni-AAA battery x1
6DOF 3axis gyro + 3 axis accelerometer -AH-6120LR/AP-6110LR-
3 axis gyro + 3 axis accelerometer
AH-6120LR Gyro +/-1000dps, Accelerometer +/- 6G
AP-6110LR Gyro +/-300dps, Accelerometer +/-3G
Low noise, high stability
Small package size
10x8x3.8tmm
Gyro Sensor with automotive safety quality and features - XV-9000series-
Selectable detection range and detection axis
Detection range: +/-100dps or +/-300dps
Detection axis: X-axis or Z-axis
AEC-Q100 compliant
High vibration and shock resistance
Compact design and high stability
Operating temperature up to 125°C
EPSON Electronics Europe GmbH has joined this exhibition from 2011. In 2012, we focus on displaying an "Inertial measurement unit (IMU)" and "Q-MEMS Gyro sensors".
The Sensor+Test will be held from 22. - 24. May 2012.
Epson Europe Electronics GmbH will be located in Hall 12, 374.
Inertial measurement unit (IMU) -S4E5A0A0-
Detection range
Gyro +/-300dps, Accelerometer +/-3G
Small and lightweight
External dimensions: 24 x 24 x 10 mm3
Weight: 7grams
Low power consumption
30 mA at VDD = 3.3V
High-accuracy, high-stability measurement performance
Angle random walk: less than 0.2 deg/√hr (accuracy)
Gyro bias stability: less than 6 deg/hr (stability)
Initial bias error: ±0.5 deg/s (1s) (static stability)
Comes with SPI and UART digital serial interfaces
Micro USB board for S4E5A0A0
Tiny USB board for IMU evaluation
This board acts as converter UART-I/F to USB-I/F.
It enables easy evaluation of the IMU with an laptop.
CAN bus system with IMU
IMU with CAN interface
CAN 2.0a/b protocol
(Baud rate Max. 1Mbps, Number of node Max. 127)
IP67 water proof
Industrial standard 5-pin M12 interface connector
Wireless system with IMU
Wireless connection IMU
IMU with fully featured Bluetooth class2 interface
(Max. 1kHz sampling, Number of node Max.4)
2h operation with Ni-AAA battery x1
6DOF 3axis gyro + 3 axis accelerometer -AH-6120LR/AP-6110LR-
3 axis gyro + 3 axis accelerometer
AH-6120LR Gyro +/-1000dps, Accelerometer +/- 6G
AP-6110LR Gyro +/-300dps, Accelerometer +/-3G
Low noise, high stability
Small package size
10x8x3.8tmm
Gyro Sensor with automotive safety quality and features - XV-9000series-
Selectable detection range and detection axis
Detection range: +/-100dps or +/-300dps
Detection axis: X-axis or Z-axis
AEC-Q100 compliant
High vibration and shock resistance
Compact design and high stability
Operating temperature up to 125°C
