- Evonik Industries AG
- Rellinghauser Straße 1-11
- 45128 Essen
- Ursula Keil
- +49 (2365) 49-9878
VESTAKEEP® Film Protects Pacemaker Batteries Welch Fluorocarbon and Evonik Industries Develop New Battery Insulators
Earlier generations of pacemakers were fitted with batteries that had to be recharged daily. Only with the advent of highperformance batteries, however, were patients relieved of this considerable burden. Following a period when even plutoniumbased radionuclide batteries were used, pacemakers are now fitted almost exclusively with topcapacity lithium iodine batteries, which power the pacemaker for up to ten years. These must be accommodated in the confined spaced of the pacemaker. The space available for the insulation is also very limited, and wall thickness tolerances are low. For this reason, the batteries have so far been encapsulated manually with considerable effort using polyimide adhesive strips or parylene conformal coatings.
Customfit insulators are an alternative, but they usually cannot be produced by injection molding because of their thin wall thicknesses, low tolerances, and long flow paths. The company Welch Fluorocarbon has now developed a unique thermoforming process that makes it possible to manufacture such components. A plastic film is fixed in a frame, melted completely by heating to a temperature above the crystalline melt point of 340 °C, and then molded in vacuum. This molding from the melt produces particularly lowstress molded parts.
Because the insulator material must be chemically resistant to metallic lithium, the choice of suitable polymers is rather restricted. Welch decided on an amorphous VESTAKEEP® PEEK film from Evonik, which both companies developed in close collaboration. The film is unusually lowstress and, in contrast to conventional extruded films, hardly flows at all on melting. Only in this way is it possible to comply with the low thickness tolerances required. Using this film, Welch Fluorocarbon is now producing battery insulators with wall thicknesses of less than 25 microns and at extremely low tolerances.
VESTAKEEP® film is highly resistant to chemicals and also features very high mechanical and flame resistance; it is stable even at high continuous working temperatures, and has excellent tribological and electrical properties. Evonik offers suitably adapted crystalline and amorphous VESTAKEEP® films for all sectors of industry, including medical applications.
In so far as forecasts or expectations are expressed in this press release or where our statements concern the future, these forecasts, expectations or statements may involve known or unknown risks and uncertainties. Actual results or developments may vary, depending on changes in the operating environment. Neither Evonik Industries AG nor its group companies assume an obligation to update the forecasts, expectations or statements contained in this release.
Evonik Industries AG
Für die oben stehenden Pressemitteilungen, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Meldungstitel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Pressetexte sowie der angehängten Bild-, Ton- und Informationsmaterialien.
Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an email@example.com.