Kontakt
QR-Code für die aktuelle URL

Story Box-ID: 722642

Deutsche Messe AG - parts2clean Messegelände 30521 Hannover, Deutschland http://www.messe.de
Ansprechpartner:in Frau Doris Schulz +49 711 854085

Parts cleaning: as clean as necessary, as efficient as possible

Increasing quality and efficiency with optimal cleaning solutions - parts2clean presents the latest technology and trends

(PresseBox) (Hannover, )
Cleaning parts and surfaces costs money - just how much money depends on the required result. Whether the job is simple degreasing or rather cleaning to meet strict technical requirements, achieving the necessary quality quickly, reliably and economically involves factors which go beyond the cleaning method used, including the selection of the proper cleaning media and containers and subjects like bath maintenance and packaging of the cleaned parts. You can explore all these aspects at parts2clean at the Stuttgart exhibition center from 9 to 11 June 2015.

"Whether we're talking about the automotive industry and related suppliers, medical equipment, aeronautics, precision engineering, optics or electronics - today virtually every sector has strict requirements for component cleanliness, and this places significantly higher demands on cleaning," says Olaf Daebler, in charge of the parts2clean show at Deutsche Messe. To play it safe, an "as-clean-as-possible" approach is frequently taken, which has an impact on cost and therefore on competitiveness. The remedy is to take a suitable cleaning approach that meets all requirements and to optimize cleaning results while reducing costs. "As the flagship trade fair for its sector, parts2clean presents a comprehensive scope of products and services that address every aspect of industrial parts cleaning, from systems and media to bath maintenance, analytics for cleanliness control, corrosion prevention, protection and packaging," explains Daebler.

Fine-tuning cleaning processes for reliability and efficiency

Wet chemical cleaning processes are the method of choice for the majority of industrial cleaning tasks. Here the dissolving capacity of the chosen cleaning media has a decisive impact on operating costs, quality and the stability of the cleaning process. The core principle that applies to media selection is "like dissolves like." This means that solvents are normally used to remove oil-based (non-polar) contaminants such as cutting oils, grease and wax. Aqueous cleaners are generally used to remove water-based (polar) contaminants such as cooling and lubricating emulsions, polishing compounds, additives, salts, abrasion and other solids. Modified alcohols with balanced oil- and water-solubility are able to remove both non-polar and polar contaminants.

There is no magic formula for matching cleaning processes or system and process engineering to a particular scenario. They must be developed with a view to the overall manufacturing process. The following factors play a role: What materials are being treated? At what point in production do the parts get contaminated, and with what? Must this contamination be removed immediately, e.g. to ensure proper results in the next processing step? Does processing involve a variety of materials that can lead to cleaning problems if they are mixed? Does the cleaning of parts made of various materials such as aluminum, steel, titanium, carbide or ceramic create a risk of cross-contamination in the given facility? The answers to these questions can be used to arrive at a cleaning solution capable of optimizing both costs and results.

The parts basket or workpiece carrier also has a major impact on the cost and quality of the cleaning process. Effective filtration and separation systems such as oil separators, particle filters and membrane filters, as well as water treatment and in the case of solvents distillation capacity, also help to prolong bath service life and reduce disposal costs. For water-based media, continuous monitoring of cleaning agent concentration ensures that baths are not changed too quickly due to safety concerns, but instead only when insufficient component cleanliness can lead to problems in subsequent process stages.

Component and surface cleaning know-how

As the only trade fair in the world focusing exclusively on industrial parts and surface cleaning, parts2clean not only reflects today's market in its entirety, but also offers lots of added value in terms of its parallel three-day forum. Lectures on a wide variety of industrial parts and surface cleaning topics will be simultaneously translated (German-English/English-German).

Deutsche Messe surface technology fairs : upcoming dates

The next surface technology fair in Germany is SurfaceTechnology at HANNOVER MESSE from 13 to 17 April 2015. The next parts2clean is scheduled from 9 to 11 June 2015 in Stuttgart, Germany. O&S and parts2clean 2016 are planned to run from 31 May to 2 June. Upcoming fairs abroad with a surface technology component are SurfaceTreatment EURASIA with a parts2clean pavilion from 12 to 15 February 2015 in Istanbul, Turkey, and also the very first Surface Technology NORTH AMERICA (parallel to IMTS) from 12 to 17 September 2016.
Für die oben stehenden Stories, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Titel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Texte sowie der angehängten Bild-, Ton- und Informationsmaterialien. Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.
Wichtiger Hinweis:

Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die unn | UNITED NEWS NETWORK GmbH gestattet.

unn | UNITED NEWS NETWORK GmbH 2002–2024, Alle Rechte vorbehalten

Für die oben stehenden Stories, das angezeigte Event bzw. das Stellenangebot sowie für das angezeigte Bild- und Tonmaterial ist allein der jeweils angegebene Herausgeber (siehe Firmeninfo bei Klick auf Bild/Titel oder Firmeninfo rechte Spalte) verantwortlich. Dieser ist in der Regel auch Urheber der Texte sowie der angehängten Bild-, Ton- und Informationsmaterialien. Die Nutzung von hier veröffentlichten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Bei Veröffentlichung senden Sie bitte ein Belegexemplar an service@pressebox.de.