Firmenlogo ET Electronic Tools GmbH

Pressefach: ET Electronic Tools GmbH

vorherige Seite vorherige Seite 12 nächste Seite nächste Seite
Ergebnisse 1 - 15 von 27

VITA 62 Conduction-Cooled 3U VPX Power Supply

31.01.2012, Hardware, ET Electronic Tools GmbH

Electronic Tools announces the immediate availability of the XPm2020, a conduction-cooled, VITA 62, 3U VPX power supply. The XPm2020 can operate over a wide input...

6U CompactPCI SBC Featuring 2nd Generation Intel® Core™ i7 Processor

19.01.2012, Hardware, ET Electronic Tools GmbH

Electronic Tools (www.etools.de...) introduces the XCalibur4401, a 6U CompactPCI Single Board Computer (SBC) based on the 2nd generation Intel® Core™ i7 processor...

XMC Module with Dual 10 Gigabit Ethernet Interfaces

19.12.2011, Hardware, ET Electronic Tools GmbH

A x8 PCI Express 2.0 port provides a high-speed interface between the XPort3300 and the host module via the P15 connector. The XPort3300 is well suited to rugged,...

3U VPX Board features 2nd Generation Intel® Core™ i7

14.12.2011, Hardware, ET Electronic Tools GmbH

The XPedite7470 utilizes the processor's quad-core technology operating at 2.1 GHz to deliver enhanced performance and efficiency, making it an excellent COTS product...

Ruggedized XMC Module Providing +28V General Purpose I/O

09.12.2011, Hardware, ET Electronic Tools GmbH

The XPort9100 is designed for use in avionics, as well as ground vehicle and ship-board applications, to control subsystems such as fire control and target acquisition...

A 3U CompactPCI Single Board Computer with Intel® Core™i7 Processor

08.12.2011, Hardware, ET Electronic Tools GmbH

The XPedite7330, with Core i7 processor with dual cores operating at 2.53, 2.0, or 1.06 GHz, delivers enhanced performance and efficiency for air-cooled, industrial...

MIL-STD-704 28 Volt 3U Power Supply for VPX and cPCI

05.12.2011, Hardware, ET Electronic Tools GmbH

The XPm2010 is extremely versatile, operating over a wide input voltage range from 16V to 50V steady state while maintaining up to 300W isolated output power. It...

A 6U CompactPCI Single Board Computer Based on the Intel® Core™2 Duo Processor

09.11.2011, Hardware, ET Electronic Tools GmbH

Electronic Tools is shipping XCalibur4101, 6U CompactPCI single-board computer featuring the Intel® Core™2 Duo processor and a ruggedized, conduction- or air-cooled...

A 6U VPX Single Board Computer Featuring Freescale MPC8572E Processor

08.11.2011, Hardware, ET Electronic Tools GmbH

Electronic Tools is shipping XCalibur1541, the MPC8572E based 6U VPX board that ranges from commercial to full blown defense (conduction-cooled) applications. With...

PrPMC/XMC Module Targeting Freescale's Dual-Core QorIQ™ P2020

07.11.2011, Hardware, ET Electronic Tools GmbH

Electronic Tools announces the availability of XPedite5501, a conduction-cooled PMC/XMC single-board computer based on Freescale Semiconductor’s dual-core QorIQ™...

6U compactPCI Board features MPC8572E PowerQUICC™ III

30.04.2010, Hardware, ET Electronic Tools GmbH

Targeting Freescale Semiconductor’s dual-core MPC 8572E PowerQUICC™ III processor, XCalibur1501 is being adopted by commercial, industrial and defense system architects...

3U cPCI Board features MPC8572E PowerQUICC™ III

29.04.2010, Hardware, ET Electronic Tools GmbH

In addition to the MPC 8572E dual-core processor, XPedite5330 provides a PMC/XMC site along with Gigabit Ethernet and the traditional PCI bus. To provide a system...

XMC Module with Intel® Core™i7 Processor and FPGA

28.04.2010, Hardware, ET Electronic Tools GmbH

With its SecureCOTS capabilities, the XPedite7302 can provide data encryption and decryption and enables developers to address a program’s protection requirements....

XMC/PrPMC Module with Intel® Atom™ Processor

27.04.2010, Hardware, ET Electronic Tools GmbH

This card comes with PCI Express or PCI interconnect and a Gigabit Ethernet port with integrated magnetics. XPedite7201 is ideal for high-bandwidth data-processing...

VME Board features Freescale MPC8640D with AltiVec™ unit

26.04.2010, Hardware, ET Electronic Tools GmbH

The XCalibur1331 is ideal for ruggedized systems requiring high bandwidth processing and low power consumption. The 8640D delivers enhanced performance with AltiVec™...

Suche

Suche innerhalb der Meldungen der Firma ET Electronic Tools GmbH





vorherige Seite vorherige Seite 12 nächste Seite nächste Seite
Ergebnisse 1 - 15 von 27