- Pressemitteilung BoxID 254471
Wittmann Battenfeld presenting innovative INDUMOLD process
At the Chinaplas 2009, the Wittmann group will present INDUMOLD, the process for inductive heating of injection molding tools developed by the plastics research institute Kunststoffinstitut Lüdenscheid (KIMW). This variothermic process yields an extremely high surface quality.
The INDUMOLD process for a wall thickness of up to 10 mm will be shown on the "bottle opener" demonstration unit developed by KIMW. An HM 110/210 injection molding machine from Wittmann Battenfeld with 110 t clamping force will be used. The bottle opener will be injection-molded from an ABS compound with a foaming agent within a cycle time of 140 seconds.
An induction heater built into the mold will heat up the cavity surface efficiently to about 160° C within only a few seconds. In contrast to infrared heating technology, the heating phase requires only a minimally longer cycle time with the use of inductive heating.
Cooling the mold down to the basic temperature with a Wittmann tempering device from the Tempro Plus series sets in directly with changeover to holding pressure.
A Wittmann W811 robot inserts the metal parts, which are supplied from a bar magazine and separated by a cylinder, and it also removes the finished parts. Dosing of the ABS resin and the foaming agent is handled by a gravimetric metering device from the Gravimax series. Subsequent drying and conveyance of the material takes place with the help of a Wittmann Drymax D30 PDC dryer with an integrated dry air conveyance system. Dry air conveyance to a just-in-time feeding unit, which minimizes the quantities of material present on the injection molding machine, is used to prevent remoistening of the dried granulate, which is an important asset especially in tropical regions.
This new technology lends itself to a wide range of applications with molded parts, resins and foaming agents. The result is a high-gloss surface - free of previously unavoidable sink marks, striations or visible joint lines in places where the melt has flown together.
The Wittmann Battenfeld booth: hall 11.1 / booth E21
Diese Pressemitteilungen könnten Sie auch interessieren
Los avances en el ámbito de la tecnología de materiales hacen que los proveedores de herramientas de corte se vean obligados a suministrar herramientas capaces de...
Les recherches et développements réalisés dans la technologie des matériaux mettent les fournisseurs d'outils de coupe au défi constant de réaliser des outils capables...